Salter 7820B Portable Bench Scale
There are three ways to contact us:
We are open Monday through Friday from 7am to 6pm Central Standard Time.
*Our toll free number only works in the USA. International callers must dial 254-771-2471.
Products bearing the NTEP symbol are certified as "Legal For Trade" within the USA and Canada. The National Conference Of Weights And Measures has approved this scale for commercial use. Not sure if you need a NTEP approved scale? Call us at 877-771-2471.
This item is small enough to ship through a regular small package carrier. We use UPS for these services.
A shipping quote can be obtained by adding this item to your shopping cart.
You Save $396.00 (44%)
|Platform Size:||12" x 20"|
|Product Spec Sheet||Product Manual|
|Salter Brecknell 7820B||Salter Brecknell 7820B|
Construction – Stainless steel weight platter.Die cast aluminum base and loadbridge.Aluminum handle.
Remote Display – 6-digit backlit display housed in an extruded enclosure with a 1.5" cable assembly with RJ45 connector. Includes 6" magnetic strip.
Remote Display Enunciators – Zero – Indicates the scale is at zero weight. Hold – Indicates the weight hold feature is active. AC Power – Indicates AC Power is connected to the scale and charging the battery
Remote Display Controls – Zero Key – Includes 2% Auto Zero tracking or manual push button to reestablish zero reference. Turns the scale OFF, when operated via battery.
Hold Key – Enables or disables weight hold feature. Enters into backlit and weight hold setting confi guration.
Weigh Hold Settings – Single – Allows you to hold the parcel weight on the display for one parcel Auto – Allows you to hold the parcel weight on the display for unlimited parcels. Sealed – Some states may not accept weight hold in NTEP approved applications. The sealed mode disables the weight feature.
Backlit Settings – Auto – Back light turns off after 5 seconds of non use. On – Back light is always on. Off – Back light is always off.
Battery Conservation – Sleep – After 5 minutes of non-use the scale will enter into sleep mode. Pressing the zero key will re-activate the scale Auto Shutdown – After 1 hour of non use the scale will shutdown. Pressing the restart button will re-start the scale.
Restart Button – While in battery operaton mode, the restart button (located on the rear of the scale) turns on the scale.
Hard Wired Battery Cable – Battery cable is hard wired to main PCB, no external connections.
Battery Life – Stored, no use - 14 days. Back light Off - 40 hours. Back light On - 12 hours. Back light Auto - 24 hours. Re-charge time - 8 hours. Re-charge cycles - 400 minimum
RS-232 Interface – 9 pin using Standard NCI protocol
Field Calibration – Alternate span points, 10 or 50 lbs, can simplify fi eld calibration. Can be set up either in decimal pounds or kilogram.
Capacity: - 200 x 0.05 lb
Internal Resolution – 1 part in 120,000
Dimensions – 12" x 19.5" x 4.6" (318 mm x 495 mm x 117 mm) standard confi guration 12" x 14" x 4.1" (318 mm x 358 mm x 104 mm), no handle
AC Power – Inline Transformer, UL/CSA Approved – Input: 120 VAC (+10%-15%), 60Hz standard 3-wire ground Output: 14 VDC (min) @ 730 mA DC - 12 VDC/1.3AH Sealed lead acid battery
Operating Environment – Temperature: 42 degree F to 104 degree F (5 degree C to 40 degree C) Relative Humidity: 10 to 95% (non-condensing)
Agency Approvals – United States: NTEP #95-070 For use as a Class lll device
Input/Output – RS-232, bi-directional, confi gurable 1200-19.2K. Transmits weight and scale status whenever a "W"
Scale Weight – 16 lbs, standard confi guration
Shipping Weight – 24 lbs, standard confi guraton